Wire Rope Hoist

Next >>

Product Code : 20

Product Specification

Wire Rope Hoist

Ganesh Engineering Co. is a reputed name in the field of manufacturing, supplying and exporting Wire Rope Hoist. We are renowned for manufacturing both plate and bolted type of Wire Rope Hoist. In the Wire Rope Hoist, the hoisting gearbox is directly mounted with rope drum and motor is mounted with gear coupling or geared brake drum which makes the working of the hoist all the more effective.

Standard Features of Hoists	Easy to install and maintain Available in Pendent Control Type or Radio Remote Control Type Single or double speed type Safe and reliable hoisting and traveling Higher efficiency to save power Cheaper in cost Safety providing limit switches to prevent over hoisting and over lowering Fail safe type brakes (which are applied when power supply is off and released when power supply is on.) Capacity up to 3 tonne
Uses	Widely used for construction purposes
Manufacturing Range	1t. to 10t. Cap. & 20 meters Height of lift

Specifications

Equipments	Wire Rope Hoist
Capacity	Available in 1ton, 2ton, 3ton, 5ton, 7.5ton& 10 ton
Lifting Height	Standard 6 meters (also available as per customers requirements)
Load test	125% of Safe working load
Type	Under Running ( Suitable for Ã¢â‚¬ËœIÃ¢â‚¬â„¢ Section or Plate fabricated Box Girder)
Gearboxes	All gearboxes, which are used in Hoisting C.T., are helical or Spur type with M.S. Fabricated Housing, Pinions and output shaft are supported on antifriction type roller/ Ball bearings. All Gears and Pinions are of En-9/En-8 materials precision machined and teeth cutting by hobbing machine duly hardened to with stand the heavy loads.
Ele. Motors	All motors are used in hoist are flange mounted type or foot mounted type squirrel cage type induction motor specially designed and manufactured as per IS 325 for crane & Hoist duty of reputed make
Brakes	Electro magnetic disc type or shoe type brake is providing in the Hoisting, This brake is automatically released when the motor circuit is on and is applied the motor circuit is off
Wire rope	The make of wire rope will be used Usha-martin and selected as per 4 to 6 time factor of safety
Rope Drum	The rope drum is of mild steel fabricated construction having right and left hand spiral grooves machined to suit the hoisting ropes. The drum is of such length that there is not more than one layer when rope is full wound.
Bottom Block	Bottom Block Assembly consisting of forged steel hook single shank type as per IS 3815 mounted on thrust Ball Bearings, with required diameter rope sheave and hook plates made out of steel
Wheels	The wheel of the trolley will be used forged steel conforming to IS 2707 GR.II duty spin hardened to 300 BHN or steel cast EN-9, material, Single flanged taper tread type fitted with antifriction type bearings mounted on runner plate.
Couplings	Half Geared Couplings are provided where required of reputed make
Bearings	All moving parts of the Hoist are supported on the anti friction type ball/roller bearings. (all bearings are SKF/ZKL/ or equal ant make)
Supply Voltage	415, 3ph., 50hz., Supply.
Control Voltage	110V.
Switch Gears	BCH, L&T, Siemens, TC or your approved equivalent Contactors, switches are providing in Ele. Panel
Push Button	Pendent type with hanging chain or wire rope
Ele. Cables	Flexible Copper Cable with ISI mark or reputed make
Limit switches	two numbers rush roller type limit switch of reputed make is provided to prevent over lowering & over hoisting